Setting Up Custom 5-23
Adding Routes to NPort Server
To enable the access from an Internet/Intranet host, you need to make sure your
NPort Server can be connected through Internet.
You may add routes into the NPort Server if your Windows NT host is at remote site.
This section lists the steps to add the routes and examples of different routes to be
added for your reference.
Adding Routes Through Server Properties
1. Go to Start à Programs à NPort à NPort Manager.
2. Select the server you want to add routes.
3. Select Server Properties from the Toolbar.
4. Select “Advanced” page.
To Next Page
Loading...
Need help?
General
