NPort Server User’s Manual
7-2
Connecting Printer to NPort Server
Connect your printer to the back of NPort Server using printer cable.
Figure 7-1 Connecting printer to NPort Server
Configuring Printer Server on Windows NT
To configure NPort Server as printer server, simply follow the instruction in this
section.
Adding the TCP/IP Printing Services
Before adding printer, you have to add the TCP/IP printing services to your
Windows NT.
1. Go to Start -> Settings -> Control Panel.
2. Select Network.
3. Go to the page for Services.
4. Check if "Simple TCP/IP Service" is existed in Services. If not, click Add and
look for "Simple TCP/IP Service" and install it.
5. Check if "Microsoft TCP/IP printing services" is existed in Services. If not,
click Add and select "Microsoft TCP/IP printing services" and install the
service.
6. Reboot your computer.
To Next Page
Loading...
