NPort Server User’s Manual
4-22
Modifying Granted Host
1. Click on the Ports.
2. Click on the IP address you like to modify.
3. Click on Modify.
4. Modify the IP address as needed.
5. Click Save Configuration if you need to activate the settings now.
. Note: This host modification will be activated on the specific host of that port
only.
Removing Granted Host
1. Click on the Ports.
2. Click on the IP address of the host you like to remove.
3. Click on remove.
4. Click OK to finish. Save Configuration as needed.
5. Click Save Configuration if you need to activate the settings now.
To Next Page
Loading...
Need help?
General
