Setting Up Custom 5-21
3. If you like to add the IP address of a single computer, select 'a single computer',
then input the IP address of the host. If you like to add a group of computer,
select 'a group computer', then input the IP address and netmask. For example,
enter IP address 192.168.1.0 and 255.255.255.0 for network class C computers.
4. Click OK to complete.
5. You can see the host you have added to the ports from the “Access Control”
page.
6. Click OK to finish.
7. Save Configuration if you need to activate the settings now.
To Next Page
Loading...
