TN-5516/5518 User’s Manual Featured Functions
3-4
Account
Setting Description Factory Default
Admin This account can modify the TN-5500’s
configuration.
User This account can only view the TN-5500’s
configurations.
admin
Password
Setting Description Factory Default
Old password
(max. 16 characters)
Enter the current password None
New password
(Max. 16 characters)
Enter the desired new password. Leave it blank if
you want to remove the password.
None
Retype password
(Max. 16 characters)
Enter the desired new password again. Leave it
blank if you want to remove the password.
None
Accessible IP
The TN-5500 uses an IP address-based filtering method to control access.
You may add or remove IP addresses to limit access to the TN-5500. When the accessible IP list is
enabled, only addresses on the list will be allowed access to the TN-5500. Each IP address and
netmask entry can be tailored for different situations:
y Grant access to one host with a specific IP address
For example, enter IP address 192.168.1.1 with netmask 255.255.255.255 to allow access to
192.168.1.1 only.
y Grant access to any host on a specific subnetwork
For example, enter IP address 192.168.1.0 with netmask 255.255.255.0 to allow access to all
IPs on the subnet defined by this IP address/subnet mask combination.
To Next Page
Loading...
Need help?
General
