2
2
Chapter 2 Getting Started
This chapter explains the initial installation process for the TN-5500. There are three ways to
access the TN-5500’s configuration settings: the serial console, Telnet console, and web console.
If you do not know the TN-5500’s IP address, you can open the serial console by connecting the
TN-5500 to a PC’s COM port with a short serial cable. You can open the Telnet or web console
over an Ethernet LAN or over the Internet.
The following topics are covered:
RS-232 Console Configuration (115200, None, 8, 1, VT100)
Configuration by Telnet Console
Configuration by Web Browser
Disabling Telnet and Browser Access
To Next Page
Loading...
Need help?
General
