TN-5516/5518 User’s Manual Featured Functions
3-7
MDI/MDIX
Setting Description Factory Default
Auto This allows the port to auto-detect the port type of
the connected Ethernet device and change the
port type accordingly.
MDI
MDIX
Choose MDI or MDIX if the connected Ethernet
device has trouble auto-negotiating for port type.
Auto
Network Settings
The Network Parameters configuration allows users to configure both IPv4 and IPv6 parameters
for management access over the network. This Moxa Ethernet switch supports both IPv4 and IPv6,
and can be managed through either of these address types. An explanation of each configuration
item follows.
IPv4
Auto IP Configuration
Setting Description Factory Default
Disable Select this to set the TN-5500’s IP address
manually assigned in the “Switch IP Address”
field.
By DHCP The TN-5500’s IP address will be assigned
automatically by the network’s DHCP server.
By BootP The TN-5500’s IP address will be assigned
automatically by the network’s BootP server.
Disable
To Next Page
Loading...
Need help?
General
