TN-5516/5518 User’s Manual Featured Functions
3-16
System File Update—By Remote TFTP
The TN-5500 supports saving your configuration or log file to a remote TFTP server or local host.
Other TN-5500 switches can also load the configuration at a later time. The TN-5500 also supports
loading firmware or configuration files from the TFTP server or a local host.
TFTP Server IP/Name
Setting Description Factory Default
IP address of TFTP
server
This specifies the IP address or name of the remote
TFTP server. This must be specified before
downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 characters This specifies the path and file name of the
TN-5500’s configuration file on the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 characters This specifies the path and file name of the
TN-5500’s firmware file.
None
Log Files Path and Name
Setting Description Factory Default
Max. 40 characters This specifies the path and file name of the
TN-5500’s log file.
None
After setting the desired paths and file names, click Download to download the prepared file from
the remote TFTP server, or click Upload to upload the desired file to the remote TFTP server.
To Next Page
Loading...
Need help?
General
