TN-5516/5518 User’s Manual Featured Functions
3-11
System Time Settings
The TN-5500 has a time calibration function based on information from an NTP server or user
specified time and date. Functions such as automatic warning emails can therefore include time
and date stamp.
NOTE
The TN-5500 does not have a real time clock. The user must update the Current Time and
Current Date to set the initial time for TN-5500 after each reboot, especially when there is no
NTP server on the LAN or Internet connection.
Current Time
Setting Description Factory Default
User-specified time This allows configuration of the local time in
local 24-hour format.
None
Current Date
Setting Description Factory Default
User-specified date This allows configuration of the local date in
yyyy-mm-dd format.
None
To Next Page
Loading...
