Moxa Technologies ToughNet Switch TN-5500 series - SNMP Read;Write Settings

TN-5516/5518 User’s Manual Featured Functions
3-23
These parameters are configured on the SNMP page. A more detailed explanation of each
parameter is given below the figure.
SNMP Read/Write Settings
SNMP Versions
Setting Description Factory Default
V1, V2c, V3, or
V1, V2c, or V3
only
This specifies the SNMP protocol version
used to manage the switch.
V1, V2c
V1, V2c Read Community
Setting Description Factory Default
Max. 30 characters
This specifies the community string to
authenticate the SNMP agent for read-only
access. The SNMP agent will access all
objects with read-only permissions using this
community string.
Public