TN-5516/5518 User’s Manual Featured Functions
3-24
V1, V2c Write/Read Community
Setting Description Factory Default
Max. 30 characters
This specifies the community string to
authenticate the SNMP agent for read/write
access. The SNMP server will access all
objects with read/write permissions using this
community string.
Private
For SNMP V3, there are two levels of privilege for different accounts to access the TN-5500.
Admin privilege provides access and authorization to read and write the MIB file. User privilege
allows reading of the MIB file only.
Admin Auth. Type (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
No-Auth
This allows the admin account to access
objects without authentication.
No
MD5-
Auth
Authentication will be based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement for
authentication.
No
SHA-
Auth
Authentication will be based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement for
authentication.
No
Admin Data Encryption Key (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
Enable
This enables data encryption using the
specified data encryption key (between 8 and
30 characters).
No
Disable This specifies that data will not be encrypted. No
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
No-Auth
This allows the admin account and user
account to access objects without
authentication.
No
MD5-Auth
Authentication will be based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement for
authentication.
No
SHA-Auth
Authentication will be based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement for
authentication.
No
To Next Page
Loading...
Need help?
General
