TN-5516/5518 User’s Manual Featured Functions
3-84
3
rd
Server
Setting Description Factory Default
IP address for the
3rd DHCP server
This assigns the IP address of the 3rd DHCP server that
the switch tries to access.
None
4
th
Server
Setting Description Factory Default
IP address for the
4th DHCP server
This assigns the IP address of the 4th DHCP server that
the switch tries to access.
None
DHCP Option 82
Enable Option82
Setting Description Factory Default
Enable or Disable Enable or disable DHCP Option 82 function. Disable
Type
Setting Description Factory Default
IP Use switch IP address as the remote ID sub-option. IP
MAC Use switch MAC address as the remote ID sub-option. IP
Client-ID Use combination of switch MCA address and IP address
as the remote ID sub-option.
IP
Other Use user-defined value as the remote ID sub-option. IP
Value
Setting Description Factory Default
Display the value according to the type you set.
Max. 12
characters
If you set Other as Type, you have to fill it. switch IP address
Display
Setting Description Factory Default
This hexadecimal value is automatically generated
according to the Value field. It’s the actual value set at
the DHCP server as the Remote-ID to identify the relay
agent. Users can not modify it.
COA87FFD
DHCP Function Table
Enable
Setting Description Factory Default
Enable or Disable Enable or disable DHCP Option 82 function for this
port.
Disable
To Next Page
Loading...
Need help?
General
