TN-5516/5518 User’s Manual Getting Started
2-9
3. After logging in, you may need to wait a few moments for the web console to appear. Use the
folders in the left navigation panel to navigate between different pages of configuration
options.
Disabling Telnet and Browser Access
If you are connecting the TN-5500 to a public network but do not intend to manage it over the
network, we suggest disabling both the Telnet and web consoles. This is done through the serial
console, by navigating to System Identification under Basic Settings. Disable or enable the
Telnet Console and Web Configuration as shown below:
To Next Page
Loading...
Need help?
General
