TN-5516/5518 User’s Manual Getting Started
2-8
After making sure that the TN-5500 is connected to the same LAN and logical subnet as your PC,
open the TN-5500’s web console as follows:
1. Point your web browser to the TN-5500’s IP address by entering it in the Address or URL
field.
2. The TN-5500’s web console will open, and you will be prompted to log in. Select the login
account (admin or user) and enter the Password. This password will be required to access any
of the consoles (web, serial, Telnet). If you do not wish to create a password, leave the
Password field blank and press Enter.
NOTE
By default, no password is assigned to the TN-5500’s web, serial, and Telnet consoles.
To Next Page
Loading...
Need help?
General
