What does 'DCDC' mean on MOXION Power Supply?
The 'DCDC' error on your MOXION Power Supply indicates an internal fault preventing the low voltage system from charging the 12 V battery, which disables primary functions. Contact Moxion Power for details of any maintenance requests.
What does 'SERVICE MODE' mean on MOXION MP75-600 Power Supply?
The 'SERVICE MODE' message on your MOXION Power Supply indicates that maintenance work is being done on the unit, and primary functions are disabled. Contact Moxion Power for details of any maintenance requests.
What to do if MOXION MP75-600 Power Supply does not output power?
If your MOXION Power Supply isn't outputting power, there are several potential causes: * The emergency stop button may be depressed. In this case, turn the control knob to STANDBY, twist and release the emergency stop button, and then turn the control knob to RUN. * The control panel circuit breaker might have tripped or is in the OFF position. To resolve this, unplug the load from the tripped control panel outlets and set the tripped circuit breaker to ON. * The twist-lock circuit breaker may have tripped or is in the OFF position. Unplug the load from the tripped twist-lock outlet and set the tripped twist-lock circuit breaker to ON. * The main circuit breaker and/or twist-lock circuit breakers might be in the OFF position. Ensure that the main circuit breaker and/or the twist...
Explains the different safety notice formats (DANGER, WARNING, CAUTION, NOTICE, TIP) used in the manual.
Details symbols used to draw attention to specific hazards and their meanings.
Describes the purpose of safety labels and warns against illegible or removed labels.
Outlines required personal protective equipment (PPE) and related safety precautions.
Specifies minimum clearances required around the unit for ventilation and access.
Lists potential residual risks of the unit and measures to mitigate them.
Warns about crushing or trapping hazards from moving parts and panels.
Details dangers associated with electrical current, including shock and death.
Provides guidance on safe operating conditions, including dust and temperature limits.
Advises against integrating third-party software without consent and notes remote monitoring.
Warns about the risk of fire due to materials with high flashpoints and thermal runaway.
Highlights the risk of tripping on cables and connectors in the operating area.
Advises caution when lifting and moving the unit due to its weight.
Warns of serious injury or damage from water ingress and improper cleaning methods.
Details critical safety precautions related to the unit's batteries.
Explains the risk of thermal runaway and necessary actions to take.
Provides essential safety guidelines for towing and transporting the unit.
Explains the requirement for trailer title and registration before towing on public roads.
Details safe procedures and equipment for lifting the unit.
Outlines qualifications and training needed for operating and maintenance personnel.
Defines the owner's responsibilities regarding unit operation and safety compliance.
Introduces the MP75-600 as a mobile energy storage system and its basic configuration.
Provides the physical dimensions of the unit with and without the trailer.
Identifies and describes the key external components of the unit.
Details the controls and indicators on the main control panel for operating the unit.
Describes the various power outlets and their functions on the unit.
Explains the cam-lock connectors used for 3-phase power connections.
Details the twist-lock connectors for heavy-duty power connections.
Identifies the charging port and supported charging rates.
Explains the location and function of the emergency stop button.
Describes the information found on the unit's identification plate.
Explains the unit's display screen and its various indicators.
Lists and defines the icons shown on the control display.
Describes how the unit handles and displays voltage mismatch errors.
Lists the items included with each unit.
Provides steps for correctly positioning the unit before operation.
Guides the user through the process of turning the unit on and setting voltage.
Explains how to test and verify the functionality of GFCI outlets.
Details the procedure for connecting loads using cam-lock cables.
Guides the user on connecting loads using twist-lock cables.
Describes how to set the unit to RUN mode to begin powering a load.
Provides steps for safely shutting down the unit after use.
Explains how to configure the auto start/stop functionality for charging.
Details how to charge the unit using EVSE equipment.
Guides the user on safely attaching the unit to a towing vehicle.
Provides instructions and checks required for towing the unit safely.
Outlines DOT regulations for transporting the unit, including labeling.
Details guidelines for loading, securing, and transporting the unit on flat-bed/gooseneck trailers.
Explains the process and safety precautions for establishing an earth connection.
Provides guidance on installing a ground rod for the unit.
Describes how to charge the 12V battery if it has been depleted.
Lists daily inspection tasks recommended by Moxion Power.
Recommends regular maintenance tasks for safe and reliable operation.
Provides detailed steps for correctly torquing wheel lug nuts.
Outlines procedures for maintaining trailer brake condition.
Provides guidelines for storing the unit for extended periods.
Advises on regular cleaning to extend the unit's lifespan.
Explains how the unit's status can be monitored remotely.
Details the critical procedure for isolating high voltage systems before maintenance.
Lists common symptoms, possible causes, and solutions for unit issues.
Provides a list of fault codes, their descriptions, and recommended solutions.
Advises on proper recycling of batteries and electronics according to regulations.
Details the electrical power output capabilities of the unit.
Lists electrical interfaces, operating modes, and battery details.
Describes the local and remote user interface elements.
Outlines environmental operating and storage conditions, and IP rating.
Provides dimensions, weight, and tire specifications.
Details towing, lifting, and cargo requirements for transportation.
Informs users to contact Moxion Power for a list of replacement parts.
General| Model | MOXION MP75-600 |
|---|---|
| Category | Power Supply |
| Input Voltage | 90-264 VAC |
| Input Frequency | 47-63 Hz |
| Output Power | 600W |
| Output Voltage | 12V DC |
| Output Current | 50A |
| Weight | 1.5 kg |
| Cooling System | Fan |
| Protection Features | Over Voltage Protection, Over Current Protection, Short Circuit Protection |
| Storage Temperature | -20°C to +85°C |
To Next Page