MR ECOTAP VPD CONTROL PRO - Power Supply; Central Processing Unit

4 Product description
Maschinenfabrik Reinhausen GmbH 201824 5252433/02 ENECOTAP
®
VPD
®
CONTROL PRO
Figure3: Overview
The individual device assemblies are described in the following section.
4.5.1 Power supply
The G1 PULS DIMENSION QS3.241 assembly supplies power to the de-
vice.
Figure4: G1 PULS DIMENSION QS3.241 assembly
4.5.2 Central processing unit
The CPU I assembly is the central computing unit for the device. It contains
the following interfaces:
▪ Internal system interface RS232 (COM1)
▪ Serial interface RS232/485 (COM2)
▪ 3x Ethernet (ETH1, ETH 2.1, ETH 2.2)
▪ USB (USB 2.0)
▪ 2x CAN bus (CAN 1, CAN 2)