4.7 Emergency engine stop from LOP
NOTICE
An emergency stop subjects the engine system to an extremely high load.
Risk of overheating, damage to components!
• Trigger an emergency stop only in emergency situations.
Emergency engine stop from LOP
Item Measure
LOP Open cap covering illuminated EMERGENCY STOP pushbutton (→ Page 110).
LOP Press illuminated EMERGENCY STOP pushbutton.
• Engine is stopped by switching off power supply to ECU;
• Engine control is deactivated;
• Engines with emergency air-shutoff flaps: Flaps close;
• Illuminated EMERGENCY STOP pushbutton flashes. Alarm signaling by
horn, flashing lamp etc. is tripped.
After emergency engine stop from LOP
Item Measure
LOP Press illuminated ALARM ACKNOWLEDGE pushbutton (→ Page 110).
• Audible and visual signaling stops.
LOP Press illuminated ALARM ACKNOWLEDGE pushbutton again.
• Power supply to ECU is provided again;
• Alarm is acknowledged.
Engine Engines with emergency air-shutoff flaps: Flaps open.
• Engine is ready for operation.
MS150031/06E 2016-010 | Operation | 117
TIM-ID: 0000002309 - 005
To Next Page
Loading...
Need help?
General