7.11.2 Air filter – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Air filter – Removal and installa-
tion
1. Loosen clamp (2).
2. Remove air filter (1) and clamp (2) from con-
necting flange of intake housing (3).
3. Verify that there are no objects in the flange
of the intake housing (3) and clean it.
4. Place new air filter (1) with clamp (2) onto in-
take housing (3).
5. Tighten clamp (2).
MS150031/06E 2016-010 | Air Filter | 189
TIM-ID: 0000000904 - 012
To Next Page
Loading...
Need help?
General