7.15.2 Engine oil filter – Replacement
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Oil filter wrench
F30379104 1
Engine oil
Oil filter
(→ Spare Parts Catalog)
SOLAS shield
(→ Spare Parts Catalog)
DANGER
Rotating and moving engine parts.
Risk of crushing, danger of parts of the body being caught or pulled in!
• Only run the engine at low power. Keep away from the engine's danger zone.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
• Wear ear protectors.
WARNING
Engine oil is hot.
Engine oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Allow the engine to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
• Avoid contact with skin.
• Do not inhale oil vapor.
NOTICE
Damage to component!
Severe material damage!
• For filter replacement with the engine running, operate the engine at low engine load.
• The filter which is to be replaced must be cut out for a brief period only.
Oil filter – Replacement with en-
gine stopped
1. Stop engine (→ Page 116) and disable engine
start.
2. Cut out the filter to be replaced.
A Right filter cut out
B Both filters cut in (normal operating
position)
C Left filter is cut out
MS150031/06E 2016-010 | Oil Filtration / Cooling | 195
TIM-ID: 0000006365 - 008
To Next Page
Loading...
