RAW WATER CIRCUIT (open circuit)
Number of cylinders 12
Raw water pump: inlet pressure, min. L bar -0.2
Raw water pump: inlet pressure, max. L bar +0.5
Pressure loss in external raw water system, max. L bar 1.0
LUBE OIL SYSTEM
Number of cylinders 12
Lube oil temperature before engine, from R °C 70
Lube oil temperature before engine, to R °C 75
Lube oil operating pressure before engine, from R bar 7.5
Lube oil operating pressure before engine, to R bar 8.5
Lube oil operating pressure, low idle (meas. point: before engine) R bar 3.5
FUEL SYSTEM
Number of cylinders 12
Fuel pressure at supply connection on engine, min. (when engine is starting) L bar -0.3
Fuel pressure at supply connection on engine, min. (when engine is running) L bar -0.3
Fuel pressure at supply connection on engine, max. (when engine is starting) L bar +0.5
Fuel supply flow, max. R liter/min 2.6
GENERAL OPERATING DATA
Number of cylinders 12
Firing speed, from R rpm 100
Firing speed, to R rpm 120
STARTING (electric)
Number of cylinders 12
Rated starter voltage (standard design) R V= 24
STARTING (pneumatic starter)
Number of cylinders 12
Starting-air pressure before starter motor, min. R bar 21
Starting-air pressure before starter motor, max. R bar 30
CAPACITIES
Number of cylinders 12
Engine coolant capacity (with cooling equipment) R liter 110
Engine oil capacity, initial filling (standard oil system) (Option: max. operating
inclinations)
R liter 105
Oil change quantity, max. (standard oil system) (Option: max. operating incli-
nations)
R liter 98
70 | Technical Data | MS150031/06E 2016-010
TIM-ID: 0000002984 - 001
To Next Page
Loading...
Need help?
General