Description of Setup Buttons 15-24
15
Tips
- You can only use the ADF for loading originals.
- You can print on 2 sheets of paper for 1-sided copy and the front and back sides of paper for 2-sided
copy.
[Tab Original]
To display: [Copy] - [Application] - [No. of Originals] - [Tab Original]
Copy an index original onto index paper, including the index tab.
Place the index original on the Original Glass.
d Reference
Load the index paper in the Bypass Tray. For details on how to load index paper, refer to "User's Guide [In-
troduction]/[Loading Paper]".
[Separate Scan]
To display: [Copy] - [Application] - [No. of Originals] - [Separate Scan]
If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
You can also perform scanning of the original by switching between the ADF and the Original Glass as re-
quired.
Settings Description
[ON]/[OFF] Select [ON] to copy an index original. Also select the size of the index orig-
inal.
To Next Page
Loading...
Need help?
General
