Description of Setup Buttons (User Settings) 16-6
16
[No Matching Paper in Tray Setting]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [No Matching Paper in Tray
Setting]
Select the operation to be taken when there is no appropriate sized paper in the specified paper tray.
[Print Lists]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Print Lists]
Specify the default paper tray and printing method (1-sided or 2-sided) used for printing reports and meter
counts.
You can temporarily change the settings when printing.
The following shows the default functions.
- [Paper Tray]: [Tray 1]
- [Simplex/Duplex]: [1-Sided]
[Auto Color Level Adjust.]
To display: [Utility] - [User Settings] - [System Settings] - [Auto Color Level Adjust.]
Adjust the criteria to determine whether an original is in color or black and white when scanning originals by
specifying the color mode to [Auto Color].
Tap [Black] or [Full Color] to adjust to one of the five levels.
[3] is specified by default.
[Power Supply/Power Save Settings]
To display: [Utility] - [User Settings] - [System Settings] - [Power Supply/Power Save Settings]
This option is available when a user's change is permitted by the administrator. For details, refer to
page 17-4.
[Output Settings]
To display: [Utility] - [User Settings] - [System Settings] - [Output Settings]
This option is available when a user's change is permitted by the administrator. For details, refer to
page 17-6.
[AE Level Adjustment]
To display: [Utility] - [User Settings] - [System Settings] - [AE Level Adjustment]
This option is available when a user's change is permitted by the administrator. For details, refer to
page 17-13.
[Auto Paper Select for Small Original]
To display: [Utility] - [User Settings] - [System Settings] - [Auto Paper Select for Small Original]
Specify whether to copy an original when an original that is so small that the machine cannot detect the size
automatically is placed on the Original Glass. To copy, select a paper size.
Settings Description
[Stop Printing (Tray Fixed)] The machines stops printing when there is no appropriate sized paper in
the specified paper tray.
Load paper to the specified paper tray or switch to another paper tray man-
ually.
[Stop Printing (Tray Fixed)] is specified by default.
[Switch Trays (Tray Priori-
ty)]
When the specified paper tray runs out of paper, the machine switches to
the paper tray where paper of the same size is loaded.
To Next Page
Loading...
Need help?
General
