Description of Setup Buttons 15-6
15
[Custom Size]
To display: [Copy] - [Paper] - [#] - [Change Tray Setting] - [Custom Size]
When loading custom size paper on the Bypass Tray, enter the length (X) and width (Y) of the paper.
You can either enter the size manually, or select from the registered sizes in the memory.
[Wide Paper]
To display: [Copy] - [Paper] - Tray1 to Tray4/Bypass Tray - [Change Tray Setting] - [Wide Paper]
Select this option when you load wide paper into the paper tray.
Settings Description
[Custom Size Settings] For the inch area, tap [+]/[-] or the keypad to enter the length (X) and width
(Y) of the paper.
For the centimeter area, tap [+]/[-] or press the Keypad to enter the length
(X) and width (Y) of the paper.
After you have entered the size, select a key ([memory1] to [memory5]) in
[Registered Paper Sizes], and tap [New]. Then the size you have entered is
registered in the memory. You can recall the registered size in the future.
[Registered Paper Sizes] The custom sizes registered in the memory are displayed.
• When you call a registered size from the memory, tap the key of the de-
sired registration name, then tap [Recall].
• To change a registration name, select a desired key, then tap [Edit
Name].
Settings Description
[Inches] When loading wide paper in inch size into paper tray, also select the paper
size.
To Next Page
Loading...
Need help?
General
