Description of Setup Buttons (Administrator Settings) 17-59
17
[Auto Zoom (Platen)]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Auto Zoom (Platen)]
Specify whether to switch [Zoom] to [Auto] when selecting paper for copying after loading an original on the
Original Glass.
When [Zoom] is switched to [Auto], the original is automatically copied in an enlarged or reduced size accord-
ing to the original and paper size.
[OFF] (Prohibit) is specified by default.
[Auto Zoom (ADF)]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Auto Zoom (ADF)]
Specify whether to switch [Zoom] to [Auto] when selecting paper for copying after loading an original on the
ADF.
When [Zoom] is switched to [Auto], the original is copied in an enlarged or reduced size according to the orig-
inal and paper size.
[ON] (Allow) is specified by default.
[Specify Default Tray when APS Off]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Specify Default Tray when APS Off]
Select a paper tray to switch to after releasing the selection of [Auto] for [Paper].
[Print Jobs During Copy Operation]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Print Jobs During Copy Operation]
Specify whether to print immediately or to print after copying is completed when a print job or fax job is re-
ceived during copy operations on the Control Panel.
[Tri-Fold Print Side]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Tri-Fold Print Side]
Specify whether to have tri-folded copies ejected with the print side folded inward or outward.
[Inside] is specified by default.
Settings Description
[Tray Before APS ON] Switches to the paper tray specified before releasing the selection of [Au-
to].
[Tray Before APS ON] is specified by default.
[Default Tray] Switches to Tray1.
Settings Description
[Accept] Immediately prints a print or fax job.
[Accept] is specified by default.
[Receive Only] A print or fax job is printed after copy operations are completed.