Description of Setup Buttons 15-62
15
[Non-Image Area Erase]
To display: [Copy] - [Application] - [Erase] - [Non-Image Area Erase]
When making copies with the ADF open and the original placed on the Original Glass, the machine detects
the outline of the original and erases the area outside the original.
Tips
- The scanning area on the Original Glass is the same as the paper size to be copied. Place the original
within the scanning area.
- The size of the original automatically detected is 3/8 inch e 3/8 inch (10 mm e 10 mm) or larger. If the
size detection fails, a blank sheet of paper is output.
- The top or end of the original image may be cut off.
Related setting (for the administrator)
- You can select the erasing method from [Bevel] and [Rectangular]. For details, refer to page 17-28.
– [Bevel]: If the background color of the original is light, it is easy to identify the border between the orig-
inal and outside area. Therefore, the machine erases the area outside the original (shadow caused by
external light) for copying.
– [Rectangular]: If the background color of the original is dark, it is difficult to identify the border between
the original and outside area. Therefore, the machine does not erase the area outside the original (shad-
ow caused by external light) for copying.
To Next Page
Loading...
Need help?
General
