Description of Setup Buttons (User Settings) 16-3
16
[System Settings]
To display: [Utility] - [User Settings] - [System Settings]
Configure the operating environment of this machine.
Settings Description
[Language Selection] Specify a language displayed in the Touch Panel and a language used for
keyboard input.
For details, refer to page 16-4.
[Select Keyboard] Select a keyboard type displayed in the Touch Panel.
For details, refer to page 16-4.
[Measurement Unit Set-
tings]
Select a system of units for numeric values displayed in the Touch Panel.
For details, refer to page 16-4.
[Paper Tray Settings] Specify the settings related to selection and switching of paper trays.
For details, refer to page 16-5.
[Auto Color Level Adjust.] Adjust the criteria to determine whether an original is in color or black and
white when scanning originals by specifying the color mode to [Auto
Color].
For details, refer to page 16-6.
[Power Supply/Power Save
Settings]
This option is available when a user's change is permitted by the adminis-
trator.
For details, refer to page 17-4.
[Output Settings] This option is available when a user's change is permitted by the adminis-
trator.
For details, refer to page 17-6.
[AE Level Adjustment] This option is available when a user's change is permitted by the adminis-
trator.
For details, refer to page 17-13.
[Auto Paper Select for
Small Original]
Specify whether to copy an original when an original that is so small that
the machine cannot detect the size automatically is placed on the Original
Glass.
For details, refer to page 16-6.
[Blank Page Print Settings] This option is available when a user's change is permitted by the adminis-
trator.
For details, refer to page 17-32.
[Page Number Print Posi-
tion]
This option is available when a user's change is permitted by the adminis-
trator.
For details, refer to page 17-33.
[Blank Sheet Detection
Level]
Adjust the detection level of blank page when [Blank Page Removal] is
specified for [Original Settings] in the copy or fax/scan mode.
For details, refer to page 16-7.
[Separate Scan from Plat-
en]
Select whether to scan originals continuously at all times even though
[Separate Scan] is not specified when scanning originals using the Original
Glass.
For details, refer to page 16-7.
To Next Page
Loading...
Need help?
General
