EasyManuals Logo

Muratec MFX-C2280 User's Guide Copy Operations

Muratec MFX-C2280
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
Description of Setup Buttons (Administrator Settings) 17-23
17
[Punch Regist Loop Size Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Punch Regist Loop Size Adjustment]
If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to
correct the obliquity of the paper to make them parallel.
This adjustment is possible when the Finisher C2280FN2 and Punch Kit C2280PUN, or the Finisher
C2280FN and Punch Kit C2280PUN are installed.
Tips
- Make adjustment while checking paper punched at a displaced position.
[Paper Alignment Plate Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Paper Alignment Plate Settings]
If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper
alignment plate for making discharged paper stored neatly.
Tips
- This adjustment is possible when the Finisher C2280FN is installed.
[Density Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Density Adjustment]
Adjust the density of images that are printed on thick paper, OHP transparencies, or envelops for each paper
type and print color.
To adjust the density of an image that is printed in black and white, select [Black Image Density].
The larger the number, the darker the background.
[0] is specified by default.
[Image Stabilization]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Image Stabilization]
Correct the misalignment or tilt of scanning area caused by changes in the temperature or humidity in the
machine to ensure high quality printing.
Settings Description
[Paper Type] Select the type of paper that is used to adjust the inclination.
[Adjust Value] Enter an adjustment value between -4 and 4 by tapping [-] and [+].
• [+]: Tap this key to adjust the inclination of the paper.
• [-]: Tap this key if it is not possible to adjust the inclination with [+] or
paper creases.
[0] is specified by default.
Settings Description
[ Alignment Plate Position
(Back)] / [Alignment Plate
Position (Front)]
Select the paper alignment plate to adjust the position.
[Adjust Value] Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-]
and [+].
[0.0 mm] is specified by default.

Table of Contents

Other manuals for Muratec MFX-C2280

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Muratec MFX-C2280 and is the answer not in the manual?

Muratec MFX-C2280 Specifications

General IconGeneral
BrandMuratec
ModelMFX-C2280
CategoryCopier
LanguageEnglish

Related product manuals