Description of Setup Buttons (Administrator Settings) 17-5
17
[Power Key Setting]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Key Setting]
Specify whether to use the Power key on the Control Panel as a sub power off key or power save key. [Pow-
er Save] is specified by default.
[Power Save Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Save Settings]
When using this machine in the factory default status, select the type of the Power Save mode you want to
switch when pressing the Power key on the Control Panel. [Low Power] is specified by default.
[Enter Power Save Mode]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] - [En-
ter Power Save Mode]
Select the timing for the machine to return to the Power Save mode after printing a job it has received in the
Power Save mode from a fax machine or computer.
[Power Consumption in Sleep Mode]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Consumption in Sleep Mode]
Specify whether to reduce the power consumption in the Sleep mode.
[Power Saving Fax/Scan]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Saving Fax/Scan]
Settings Description
[Sub Power OFF] Press the Power key briefly to turn the sub power off. If the Power key is
held down, the Power Save mode shifts to the ErP Auto Power Off mode
(close to Main Power Off mode), which offers a higher power saving effect
than when the Sub Power Off mode.
[Power Save] Press the Power key briefly to shift to the Power Save mode (Low Power
or Sleep mode). Hold down the Power key to shift to Sub Power Off mode.
Settings Description
[Low Power] Switches to the Low Power mode. Turns off the display of the Touch Panel
to reduce power use.
[Sleep] Switches to the Sleep mode. Sleep mode provides a greater power saving
effect than Low Power mode. However, the time required to return to the
normal mode is longer than the time required to recover from Low Power
mode.
Settings Description
[Normal] Switches to the Power Save mode based on the time specified in [Low
Power Mode Settings] or [Sleep Mode Settings].
[Immediately] Switches to the Power Save mode immediately after a print job has ended.
[Immediately] is specified by default.
Settings Description
[Enable] Further reduces the power consumption in Sleep mode. Select [Enable] in
normal conditions.
[Enable] is specified by default.
[Disable] Select this option when a smooth network communication is not estab-
lished while [Enable] is enabled.
To Next Page
Loading...
Need help?
General
