Description of Setup Buttons 15-4
15
[Density]
To display: [Copy] - [Density]
Adjust the density of a copy image.
[Paper]
To display: [Copy] - [Paper]
Select the paper size and type for copying. You can also change the size and type settings of the paper load-
ed in paper trays.
For details on the available paper types, refer to "User's Guide [About This Machine]/[Checking the Available
Paper Types]".
Settings Description
[Auto] Tap this button to automatically select paper fitting the size of the original
when making a copy.
[1] to [4] Tap this button to specify paper loaded into any of Tray 1 to Tray 4 and
make a copy.
[#] Tap this button to copy onto the paper loaded into the Bypass Tray.
[Change Tray Setting] If necessary, change the size and type settings of the paper loaded into the
selected paper tray.
• [Paper Type]: Select the type of the paper loaded into the selected pa-
per tray.
• [Paper Size]: Select the size of the paper loaded into the selected paper
tray.
Selecting [Auto Detect] automatically detects the size of the loaded pa-
per.
To Next Page
Loading...
Need help?
General
