Muratec MFX-C2280 User's Guide Copy Operations

Specifying the Original Size and Scan Method 7-2
7
7 Specifying the Original Size and Scan Method
Specifying the original size ([Original Size])
The size of the original is detected automatically. If the size of the original is not detected correctly, select a
key that indicates the size of the original to be scanned.
If the machine cannot detect the size of irregular sized originals, manually specify the size.
For details, refer to page 15-21.
Specifying the binding position of the original ([Binding Position])
When scanning a 2-sided original, specify the binding position of the original in [Binding Position] to prevent
the binding position from being reversed between the front and rear faces.
For details, refer to page 15-21.
Specifying the original loading direction ([Original Direction])
When scanning a 2-sided original etc..., you can specify the original loading direction so that the vertical di-
rection is set correctly.
For details, refer to page 15-22.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English