Description of Setup Buttons 15-44
15
[Poster Mode]
To display: [Copy] - [Application] - [Layout] - [Poster Mode]
The original image is enlarged, divided, and printed on multiple sheets. When you join the printed sheets, you
will create a large poster.
Settings Description
[ON]/[OFF] Select [ON] to specify Poster Mode.
[Select the finished Z-fold
Size]
Specify the finished size by using any of [Image Size], [Paper Size] and
[Zoom].
• [Image Size]: Specify the finished size after the image is enlarged, in pa-
per size. When you join the copied sheets at overlap margins, the fin-
ished size is the same as the specified paper size.
• [Paper Size]: Specify the finished size, which includes both the size af-
ter the image is enlarged and the overlap margin, in paper size. When
you join the copied sheets at overlap margins, the finished size is small-
er than the specified paper size.
• [Zoom]: Specify the finished size after the image is enlarged according
to the zoom ratio. When you join the copied sheets at overlap margins,
the finished size is the same as the specified zoom ratio. The required
number of print sheets depends on the zoom ratio you have specified.
[Original Size] If the size of the original is not detected correctly, select a key indicating
the size of the original to be scanned. If the machine cannot detect the size
of irregular sized originals or photos, manually specify the size.
[Total Pages] When you have selected other than [Auto] in [Original Size], the number of
sheets to be output is displayed.
To Next Page
Loading...
Need help?
General
