Description of Setup Buttons (Administrator Settings) 17-57
17
[Print Simple Auth.]
To display: [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [Print Simple Auth.]
Specify whether to allow authentication based only on the user name (quick authentication for printing) when
the printer driver is used for printing in an environment where user authentication is employed. When external
server authentication is implemented, register the authentication server for quick authentication for printing.
Settings Description
[Authentication Setting] Specify whether to allow authentication based only on the user name
(quick authentication for printing) when the printer driver is used for printing
in an environment where user authentication is employed.
[Restrict] is specified by default.
[Register Authentication
Server]
When external server authentication is implemented, register the LDAP
server to check user names.
Tap [Check Connection] to try connecting to the LDAP server using the en-
tered information and check if the information registered is correct.
Tap [Reset All Settings] to reset all the information entered.
[External Server Au-
thentication]
Select the external server name to be used as a part of user information
when authentication using the LDAP server is successfully completed from
the external servers registered on this machine.
The external server selected here is used for the following purposes.
• To use as a part of authentication information to save in this machine,
and
• To use for restricting the functions of this machine or managing the
maximum allowance.
[Timeout] Change the timeout time of communication with the LDAP server if neces-
sary.
[60 sec.] is specified by default.
[Search Attributes] Enter the search attribute to be used for search of a user using the LDAP
server (using up to 64 characters).
The attribute must start with an alphabet character.
[uid] is specified by default.
[Server Address] Enter the LDAP server address.
Use one of the following entry formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Search Base] Specify the starting point to search for a user to be authenticated (using up
to 255 characters).
This option also searches in subdirectories under the entered starting
point.
Example of entry: "cn=users,dc=example,dc=com"
[SSL Setting] Specify whether or not to use SSL for communication with the LDAP serv-
er.
[OFF] is specified by default.
[Port Number] If necessary, change the LDAP server port number.
Normally, you can use the original port number.
[389] is specified by default.
[Port Number (SSL)] If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[636] is specified by default.
To Next Page
Loading...
Need help?
General
