Description of Setup Buttons 15-54
15
[Stamp Repeat]
To display: [Copy] - [Application] - [Stamp/Composition] - [Stamp Repeat]
Stamp such as "Copy" and "Private" are printed on the entire page.
Tips
- You can print multiple stamps, such as registered stamp, preset stamp, date/time, job number, and se-
rial number, at a time. However, the number of stamps that can be printed may be limited depending
on the type and angle of the selected stamps.
Settings Description
[ON]/[OFF] Select [ON] to repeatedly print a stamp.
[Stamp Repeat Type] Select a stamp used. The date and time can also be printed.
• [Preset Stamp]: Select a preset stamp to be printed.
• [Registered Stamp]: Select a registered stamp to be printed.
• [Date/Time]: Select a format (type) of date and time to be printed. The
date/time when the original was scanned is stamped on the paper.
• [Other]: Specify the job number, the machine's serial number, and dis-
tribution control number to be printed.
[Stamp Selection] The registration status of the stamp is displayed.
[Detail Setting] Select the color, density, size, and pattern overwriting of print characters if
necessary.
[Change/Delete Position] Allows the stamp position settings to be checked, changed or deleted, if
necessary. You can change the stamp sequence and insert a space be-
tween stamps. When you select up to four stamps, you can change their
angle (within +/-45 degrees).
To Next Page
Loading...
Need help?
General
