Description of Setup Buttons 15-64
15
[Card Shot]
To display: [Copy] - [Application] - [Others] - [Card Shot]
When you want to copy cards, you can arrange the front and back sides of the card on the same side of a
single page and print them onto one sheet.
d Reference
For details about the operation procedure of [Card Shot], refer to page 8-2.
Related setting
- A card size can be registered, and the default [Layout] and [Zoom] values can be changed. For details,
refer to page 16-14.
Settings Description
[ON]/[OFF] Select [ON] to specify Card Shot.
[Original Size] Specify the size of the card to copy by tapping [+]/[-] for the inch area, or
by tapping [+]/[-] or pressing the Keypad for the centimeter area. From the
[Registered Paper Size], you can recall a size previously stored and specify
the size.
[Layout] Select the layout for arranging the front side and back side of the card on
the paper from [Top/Bottom], [Left/Right (Top Half)], and [Left/Right].
[Zoom] Select a zoom ratio for copying.
• [Full Size]: Copy by enlarging according to the paper size.
• [x1.0]: Copy with the same size as the card.
To Next Page
Loading...
Need help?
General
