Muratec MFX-C2280 User's Guide Copy Operations

Copy Operations 1-13
1.4 Recalling a Program for Copying
1
1.4 Recalling a Program for Copying
Copy program
Program is a function used to register a combination of various copy settings as a recall key. The program to
be registered in the copy mode is called copy program.
For copy program, there are programs in which all copy settings are registered, and image adjustment pro-
grams in which only settings related to image quality are registered.
When you register a copy program, you can recall the combination of various copy settings from the main
screen with simple action.
Registering a copy program
You can register up to 30 normal programs and up to three image adjustment programs.
1 Tap [Copy].
2 Configure copy settings.
% The settings configured here is registered as program.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English