Muratec MFX-C2280 User's Guide Copy Operations

Copy Operations 1-11
1.3 Previewing the copy job
1
4 If necessary, specify the number of copies using the Keypad.
% To use the Keypad, slide the Control Panel to the left.
% If the [10 Keypad] is assigned to the Register key, pressing the Register key enables you to display
the Keypad on the Touch Panel to enter data.
% To retype the number of copies, press C (Clear).
5 Press Preview.
6 Tap [Print], and select [Original Direction] according to the original direction.
7 Tap [Start].
% If the original is loaded into the ADF, one copy is made. Go to Step 11.
% If the original is loaded on the Original Glass, go to step 8.
8 Load the next batch of the original, and then press the Start key.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English