Copy Operations 1-16
1.4 Recalling a Program for Copying
1
4 Select the program you want to recall, and tap [Recall].
% You can also recall a [Image Adjustment Programs] from [Original Type].
% Tap [Check Setting] to view the selected program settings.
The registered content of program is applied.
5 Press the Start key.
% If desired, tap [Check Setting] before starting a copy, and check the settings.
The original is scanned and copy begins.
% If you press the Stop key while scanning or printing an original, processing is stopped, and a list of
inactive jobs is displayed. To perform processing again, delete the inactive jobs from the list.
% If [Ready to accept another job.] appears while printing a job, you can scan the next original.
To Next Page
Loading...
Need help?
General
