6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group
A:
2.1.2 Loading a Drum Kit from the Factory Library Using the Controller
On your controller, do the following:
1. Press GROUP + pad 13 (also labeled A) to select the first Group slot. This is where you
are going to load our drum kit. While you hold GROUP, the pad 13 should be lit in blue to
indicate that it is selected.
2. Press the BROWSE button at the left of your controller.
The BROWSE button lights up. In the display, you now are presented with a selection of
choices.
3. Press F1 above the display to select FILTER.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE MIKRO - Getting Started - 20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
