3 Building Your Own Drum Kit
In this tutorial, you will exchange some of the Sounds of your drum kit, and adjust a few set-
tings for your Project and your Group. On the way, you will discover some features of the MA-
SCHINE software user interface.
Prerequisites
It is assumed here that you have followed the previous tutorial. In particular, you already know
how to:
▪ Load a Group using the Browser.
▪ Use the pads to play the Sounds of that Group.
▪ Record a simple Pattern with that Group.
▪ Save the current Project for a later use.
If you have any doubts about these tasks, please refer to chapter ↑2, First Steps before pro-
ceeding!
3.1 Opening Your Project
If for any reason your tutorial Project is not currently open in MASCHINE (e.g., you opened an-
other Project in the meantime), you first need to open it again. You can do this with the con-
troller or in the software, for example using the MASCHINE Browser.
If you closed MASCHINE and started it again, your last Project should automatically load by de-
fault. If you changed this setting, follow these instructions to load the tutorial Project again!
If the tutorial Project is already open in MASCHINE, you can skip to section ↑3.2, Customizing
Your Drum Kit.
Building Your Own Drum Kit
Opening Your Project
MASCHINE MIKRO - Getting Started - 32
To Next Page
Loading...
Need help?
General
Weight and Dimensions
