→ The Kick Plug-in is now loaded and is ready to be tweaked.
3.2.2.2 Loading a Drumsynth into a Plug-in List on the Controller
1. Press SELECT + pad 5 to select the Sound Kick Ektl A 2.
2. Press F3 to select the SOUND tab.
3. Press NAV + F3 to select PLUG-IN.
4. Continue to hold the NAV button and press pad 1 to select the Plug-in slot.
Release NAV.
5. Press SHIFT + BROWSE to select an effect.
If you would have pressed BROWSE alone here, you would have accessed the Browser. By
additionally holding SHIFT, you access the Plug-in menu instead!
6. Press F1 to select FILTER.
⇨ This will allow us to narrow down the available effects to what you are looking for.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE MIKRO - Getting Started - 44
To Next Page
Loading...
