Adjusting Tempo
To adjust the overall Tempo of your song, you can use the display in the Header, at the top of
the MASCHINE window:
The BPM control in the Header.
► To adjust the Tempo (Beats Per Minute) value of your Project, click the BPM value, hold
the mouse button and drag vertically.
3.2.3.2 Adjusting Volume, Swing, Tempo and Tune on Your Controller
You can now adjust the volume, swing, tempo and tune for your overall Project, for each
Group, and for each Sound individually using the Control encoder:
Adjusting Volume
1. Press the MAIN button to activate it (the button lights up).
2. Press F1 to select VOLUME.
3. To adjust the overall volume, simply turn the Control encoder. Press and turn the Control
encoder to adjust the value in finer increments.
4. To adjust the volume of a particular Group, press and hold the GROUP button, press the
pad corresponding to the desired Group (the pad must be lit, here the pad 1 for your
drum kit), and turn the Control encoder while holding GROUP. Press and turn the Control
encoder to adjust the value in finer increments.
5. To adjust the volume of an individual Sound, press and hold its pad, and turn the Control
encoder. Press and turn the Control encoder to adjust the value in finer increments.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE MIKRO - Getting Started - 47
To Next Page
Loading...
Need help?
General
Weight and Dimensions
