8. Click All Banks to reveal a list of all MASSIVE banks installed on your computer:
9. From this list, click
Massive Factory.
This will update the results list with only presets from this bank.
10. In the Tag Filter below, click Bass in the TYPES section.
11. Click Bass Line in the Sub-Type section to further narrow your search.
→ You can now load a bass preset by double-clicking its entry in the result list below.
5.3.1.2 Browsing Instrument Presets on the Controller
On your controller, do the following:
1. Press GROUP + pad 14 to select the Group slot B1.
Adding a Bass Line
Using an Instrument Plug-in for the Bass
MASCHINE MIKRO - Getting Started - 75
To Next Page
Loading...
