Native Instruments Maschine Mikro MK2 Getting Started

1. Click the Osc2 label at the top of the Control area to select the Osc2 parameter page.
The Control area now displays the parameters of that page.
2. Click the fourth knob (Osc2Amp) and drag your mouse vertically to adjust the value.
You can fine-adjust the parameter value by holding down [Shift] on your computer keyboard while
you drag the mouse.
5.5.2 Accessing the Plug-in Parameters on the Controller
1. Press F3 to select SOUND.
This displays parameters for the selected Sound slot.
2. If the Sound slot 1 containing the “Analovue” Sound is not currently selected, select it by
pressing SELECT + pad 1.
3. Press NAV + F3 to select PLUG-IN (more on this later).
The display should now look like this:
→ You now have access to the parameters of your bass Sound “Analovue.” At the bottom of
the display, the selected parameter and its value are displayed.
The selected parameter and its value displayed at the bottom of the display.
Adding a Bass Line
Accessing the Plug-in Parameters
MASCHINE MIKRO - Getting Started - 85

Native Instruments Maschine Mikro MK2 Specifications

General

Mixer section	No
Product color	Black
Backlight buttons	Yes
USB direct playback	-
Apple docking compatibility	Not supported
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	195 mm
Width	320 mm
Height	50 mm
Weight	1200 g