NCR 7454 - Pentium Default BIOS Settings

3-26 Chapter 3: Setup
BIOS Default CMOS Values (Pentium)
The following are the BIOS default CMOS values for the terminal.
Note: When installing a new BIOS from the CD, the Processor Board
type is automatically detected and the correct BIOS is automatically
installed.
Main Values
System Time
(variable)
System Date
(variable)
Legacy Diskette A:
144 MV/1.25 MV, 3 ½"
Legacy Diskette B:
Disabled
IDE Primary Master
Type [Auto]
Cylinders 4191
Heads 16
Sectors/Track 63
Maximum Capacity 2163 MB
Multi-Sector Transfers 16 Sectors
LBA Mode Control Enabled
32 Bit I/O Disabled
Transfer Mode Fast PIO 4
Ultra DMA Mode Disabled