Appendix B: Feature Kits B-11
Set-Up Option 2
Set the modem to use IRQ5 and I/O Address 3E8. This option gives the
user access to both COM ports, Onboard LAN boot, and the parallel
port. However, the MSR and Disk-On-Chip must be disabled.
Bios Option Setting Default (Y / N)
Serial Port A 3F8 IRQ4 Y
Serial Port B 2F8 IRQ3 Y
Parallel Port 378 IRQ 7 Y
Floppy Disk Controller Enabled Y
Serial Port C Disabled N
Serial Port D Disabled N
Disk-On-Chip Disabled N
MSR Address Disabled N
MSR IRQ* Disabled N
On-board Intel LAN ROM Enabled Y
On-board Intel PXE Enabled Y
Parallel CD-ROM Boot Disabled Y
* MSR IRQ does not need to be disabled, but does not serve a
purpose if the address is disabled.
To Next Page
Loading...
