Chapter 3: Setup 3-35
Cache Memory
Note: Cache memory must be present on the Processor Board in order
to use this option.
This option specifies your terminal’s cache memory.
1. Move the cursor to the Cache Memory option, press Enter and the
following sub-menu appears.
Cache Memory Item Specific Help
Memory Cache: [Enabled]
Cache System BIOS area: [Write Protect]
Cache Video BIOS area: [Write Protect]
Cache Base 0-512k: [Write Back]
Cache Base 512k-649k: [Write Back]
Cache Extended Memory area: [Disabled]
Cache A000 - AFFF: [Disabled]
Cache B000 - BFFF: [Disabled]
Cache C800 - CBFF: [Disabled]
Cache CC00 - CFFF: [Disabled]
Cache D000 – D3FF: [Disabled]
Cache D400 – D7FF: [Disabled]
Cache D800 - DBFF: [Disabled]
Cache DC00 - DFFF: [Disabled]
Cache E000 – E3FF: [Write Protect]
2. Move the cursor to the Memory Cache option.
3. Press Enter and then select the desired setting from the drop-down
menu.
4. Set the other options on this menu as desired. Select Help for more
information.
5. Move the cursor to the Exit Menu, select Save Changes & Exit or Save
Changes, and press Enter.
Main
Exit Submenu
PhoenixBIOS Setup Utility
Disabled
Enabled
To Next Page
Loading...
