EasyManua.ls Logo

NCR 7454 - Other Integrated Devices and Indicators; Hard Disk Drive; Reset Switch; Internal Speaker

NCR 7454
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1: Product Overview 1-29
Other Integrated Devices and Indicators
Hard Disk Drive
A 2.5" IDE hard disk is available to support Windows NT. The drive is
the standard type that is used by notebook PCs.
Reset Switch
The Reset Switch is provided as a last resort to reboot the system if the
software reset port mechanisms fail. This switch is located on the row
of connectors that are located at the bottom of the enclosure. Although
not intended to be easily accessible, the reset switch can be operated
without removing covers or using any special tools.
16454
Reset Switch
Reset Procedure
1. Press the Reset Switch and hold it in for more than 4 seconds. The
screen goes blank.
2. Press the Reset Switch again. The system then reboots.
Internal Speaker
The Internal Speaker is connected to the PC speaker output of the
system chipset, not to the audio subsystem. It is connected to the
Processor Board via a harness and mounted inside the Processor Board
enclosure.

Table of Contents

Other manuals for NCR 7454

Related product manuals