Chapter 2: Hardware Installation 2-5
Identifying the Cable Connectors
The following illustration identifies each of the cable connectors. Refer
to the sections following the illustration for specific instructions on
installing each peripheral. After installing the peripheral and LAN
cables, replace the cable cover and tighten the thumbscrew.
19107
CRT
LAN
USB 1
COM 1
COM 2
Keyboard
PS/2
Parallel
Power
Audio Out
Cash Drawer
Speaker
RS-232
(COM 3 & 4)
IRDA (not used)
Microphone
(optional)
USB 2
Note: COM1 and COM3 are powered ports.
Note: The COM3 & COM4 RS-232 ports require the Dual RS-232 Port
Kit (7454-F072) feature
To Next Page
Loading...
