EasyManua.ls Logo

NCR 7454 - Board BIOS

NCR 7454
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-18 Chapter 1: Product Overview
Resolutions Supported
Resolution Colors Max Vfreq
800x600x8bpp 256 85 Hz
800x600x16bpp 64 K 85 Hz
800x600x24bpp 16 M 85 Hz
Colors Supported
Resolution 256 Colors
(8-Bit)
65,000 Colors
(16-Bit)
16.7 M Colors
(24-Bit)
800x600 512 K 1 MB 2 MB
Board BIOS
The Processor Board uses a Phoenix BIOS, which is stored in Flash
ROM and easily upgraded through the network connection or serial
port. The Flash EEPROM also contains the Setup utility, Power-On Self
Tests (POST), and APM 1.2. The board also supports system BIOS
shadowing, allowing the BIOS to execute from onboard write-
protected DRAM.
The BIOS displays a sign-on message during POST identifying the type
of BIOS and a five-digit revision code.
FLASH memory Implementation
The Intel E28F800B5-T70 Flash component is organized onboard as
1024 K x 8 (1 MB). While a typical PC BIOS image including video and
LAN boot ROM code normally fits in 256 K on the Pentium Board and
512 K in the Pentium III/Celeron board, the boards support a 1 MB
flash ROM. The current Phoenix BIOS release only requires 256 K of
this 1 MB total. The Flash device contains the PC System BIOS along
with the Video BIOS and LAN boot ROM which compresses the ROM
images into a single binary image.

Table of Contents

Other manuals for NCR 7454

Related product manuals