Chapter 2: Hardware Installation 2-11
Installing a Remote Customer Display
The terminal supports three high-post remote customer displays. The
mounting configuration is the same and appearance is similar:
• 7454-K453 Remote Customer Display (4x20 characters, VFD)
• 5972-1000 Remote Customer Display (2x20 characters, VFD)
• 5973 International VFD Customer Display
7454-K453 Remote Customer Display
16670
1. Place the Display Mount on the desired surface within or 4 meters
(13 feet) of the host terminal.
2. Determine if the cable should be routed down through the
mounting surface or if it should be run on top of the surface.
To Next Page
Loading...
